Chandkheda, Ahmedabad, Gujarat
- GST NO. : 24CDPPP9738Q1ZB
Cartridge Filters
Leading Manufacturers, Wholesaler and Trader of Polyethersulfone Pleated Cartridge Filter, Polypropylene Pleated Cartridge Filter, Polypropylene Spun Cartridge Filter, Polypropylene Wound Cartridge Filter, PTFE Cartridge Filter, Resin Bonded Cellulose Cartridge Filter, Sintered Metal Powder Cartridge Filter and Stainless Steel Wiremesh Cartridge Filter from Ahmedabad.
| Business Type | Manufacturer, Supplier |
| Micron Rating | 0.05, 0.1, 0.2, 0.45, 1 μ |
| Length | 10”, 20”, 30”, 40” |
| Inner Diameter Standard | 28 mm |
| Outer Diameter Standard | 64 mm |
| Operating Temperature | 80° C |
| Configuration | Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), Code 3(222 O’ Ring Flat and Bayo |
| Filter Media | 100% PES Hydrophilic membrane |
| Support Media | Polypropylene Fiber |
| ‘O’ Rings/Gaskets | Silicone/ EPDM/ Viton |
Advantages :
- Provide broad chemical compatibility.
- Extremely high flow rates at low pressure drops
- PES is permanently hydrophilic membrane
- Cost effective for a variety of aqueous based liquids.
- No adhesives, binders or surfactants.
- Reduces downtime & improves throughput.
- Meets ASTM bacterial validation standards
Applications :
- End point filtration in variety of processes like:
- Bottle and process water
- Beer, wine & beverages
- Serum & blood based products
- Cell & tissue culture media
- Diagnostics
- Microbiological growth media
- Antibiotics
- Vaccine preparation
- Ophthalmic
- Oral & topical applications
- Protein solutions
- Inks, dyes & lacquers
- Acid, base & solvent filtration
| Business Type | Manufacturer, Supplier |
| Micron Rating | 0.2, 0.5, 1, 3, 5, 10, 25, 50, 70 μ |
| Length | 10”, 20”, 30”, 40” |
| Inner Diameter Standard | 28 mm |
| Outer Diameter Standard | 64 mm |
| Operating Temperature | 80° C |
| Configuration | Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), Code 3(222 O’ Ring Flat and Bayo |
| Filter Media | 100% Polypropylene Fiber |
| Support Media | Polypropylene Fiber |
| ‘O’ Rings/Gaskets | Silicone/ EPDM/ Viton |
Advantages :
- Very good for pre filtration & Clarification of fluids
- Graded porosity polypropylene Media.
- 100% PP construction, wide chemical compatibility.
- Consistent & good flow rates.
- Biologically safe
- No fiber migration
- FDA approved
- Thermally welded construction
- End connections to fit all standard housings
Applications :
- Pharmaceuticals
- Food and Beverage
- Chemical Industry
- Water Treatment Industry
- Metal Finishing
- Electronics
- Cosmetics
| Business Type | Manufacturer, Supplier |
| Micron Rating | 0.5, 1, 3, 5, 10, 25, 50, 100 μ |
| Length | 10”, 20”, 30”, 40” |
| Inner Diameter Standard | 28 mm |
| Outer Diameter Standard | 64 mm |
| Outer Diameter Jumbo Cartridge | 100 – 110 mm |
| Operating Temperature | 80° C |
| Configuration | Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), Code 3(222 O’ Ring Flat and Bayo |
| Filter Media | 100% Polypropylene Fiber |
| Support Media | Polypropylene Fiber |
| Inner Core | Polypropylene Cage |
| End Caps | Polypropylene |
| ‘O’ Rings/Gaskets | Silicone/ EPDM/ Viton |
Advantages :
- High flow rates and low pressure drops
- Wide chemical compatibility
- Particles removed through the entire depth of filter cartridge.
- Graded density structure for maximum dirt holding capacity
- Supported core for overall strength
- Thermal bonding process stops media migration
- Contains no resin binders, solvent, wetting or antistatic agents
Applications :
- Pharmaceutical Industry
- RO treatment of water
- Color & Dyes Industry
- Chemical Industry
- Water Treatment Industry
- Textile industry
- Edible oils
- Electronics
- Cosmetics
| Business Type | Manufacturer, Supplier |
| Micron Rating | 0.5, 1, 3, 5, 10, 25, 50, 100, 150 μ |
| Length | 10”, 20”, 30”, 40” |
| Inner Diameter Standard | 28 mm |
| Outer Diameter Standard | 64 mm |
| Outer Diameter Jumbo Cartridge | 100 – 110 mm |
| Configuration | Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), Code 3(222 O’ Ring Flat and Bayo |
| Filter Media | 100% Polypropylene fiber / Micro Glass-fibre/ Cotton |
| Support Media | Polypropylene Fiber |
| Inner Core | Polypropylene Cage/ Stainless Steel for Cotton Wound |
| End Caps | Polypropylene |
| ‘O’ Rings/Gaskets | Silicone/ EPDM/ Viton |
Advantages :
- True Depth filtration
- High Solids holding capacity
- Wide chemical compatibility
- A broad range of media and center core options provide excellent compatibility with a variety of fluids.
- Removal ratings from 1 to 20μm
- High efficiency but low in price for equipment installation & cost saving
- Fits into most standard housings
- Graded pore structure for efficient removal of a wide range of particle size
Applications :
- Organic Acids, Alkalis, Solvents
- Chemical industries
- Food & Beverage
- Electronic Industry
- Potable liquids, oils
- Fishing industry
- Cosmetic industry
- Solar heating system
- Petrochemical industry
- Water based solutions
- Reverse osmosis pre treatment
| Business Type | Manufacturer, Supplier |
| Micron Rating | 0.1, 0.2, 0.45, 1 μ |
| Length | 4”, 10”, 20”, 30”, 40” |
| Inner Diameter Standard | 28 mm |
| Outer Diameter Standard | 69 mm |
| Operating Temperature | 100° C |
| Filter Media | 100% PTFE Membrane |
| Support Media | Polypropylene Fiber |
| ‘O’ Rings/Gaskets | Silicone/ EPDM/ Viton/Buna-N |
Advantages :
- Hydrophobic PTFE membrane, prevents moisture in venting and wet air filtration.
- PTFE cartridge has excellent chemical resistance and maximum chemical compatibility.
- Higher flow rates with lesser pressure drop
- Free from binders since end caps are thermally sealed.
- Absolute rated
- Steam Sterilizable
Applications :
- Pharmaceutical industry
- Vent filtration
- Sterilization of inlet and exhaust flow
- Nitrogen gas filtration
- Strong acids and base filtration
- Sterile filtration of compressed air
- Electronic industry
- Cleaning & manufacturing process of semiconductor
- Cleaning & manufacturing process in LCD factory
| Business Type | Manufacturer, Supplier |
| Type | Resin Bonded |
| Shape | Round |
| Color | Brown |
| Micron Rating | 1, 3, 5, 10, 25, 50, 75, 100 μ |
| Length | 10”, 20”, 30”, 40” |
| Inner Diameter Standard | 28 mm |
| Outer Diameter Standard | 64 mm |
| Operating Temperature | 95° C |
Advantages :
- High dirt holding capacity.
- Resin bonded, cellulose depth type, graded pore structure.
- Grooved and un-grooved options available for more surface area.
- The overall graded pore structure effect is to stop large particles on the outer portion of the cartridge while smaller particles become trapped as they progress through the declining tortuous path in the cartridge.
- The annular grooves expand the surface collection area by more than 60%, preventing premature blinding of the outer surface.
Applications :
- Water
- Chemicals
- Paints
- Inks
- Organic Solvents
- Lube Oil
- Edible Oil
- Resins
- Air & Gas
- Pharmaceuticals
| Business Type | Manufacturer, Supplier |
| Micron Rating | 0.2, 0.5, 1, 3, 5, 10, 25, 50, 75, 100 μ |
| Length | 10”, 20”, 30”, 40”, and Customizable Lengths |
| Inner Diameter Standard | 28 mm |
| Outer Diameter Standard | 64 mm |
| Operating Temperature | -200°C to1000°C |
| Configuration | Double Open End (DOE), Code 7(226 O’ Ring Flat and Bayonet Design), 1” BSP Threaded |
Advantages :
- High mechanical strength & good integrity
- Good corrosion and thermal resistance
- No possibility of media migration
- Good permeability
- Service life can be prolonged by cleaning and regenerating process
Applications :
- Gas & liquid filtration
- Solid catalyst recovery
- Filtration of slurry oil
- Filtration of petrochemical products
- High temperature gas filtration
- Vent applications
- Chemical reagents
- Fluidization
| Business Type | Manufacturer, Supplier |
| Micron Rating | 0.2, 0.5, 1, 3, 5, 10, 25, 50, 75, 100 μ |
| Length | 10”, 20”, 30”, 40”, and Customizable Lengths |
| Inner Diameter Standard | 28 mm and customizable |
| Outer Diameter Standard | 64 mm and customizable |
| Operating Temperature | 250° C |
| Filter Media | SS304/SS316 |
| Support Media | SS304/SS316 |
| ‘O’ Rings/Gaskets | Silicone/ EPDM/ Viton/Buna-N |
Advantages :
- 100% Stainless steel
- Superior chemical compatibility
- Excellent mechanical strength
- High Thermal tolerance
- High dirt holding capacity
Applications :
- Corrosive gas & liquid filtration
- Steam filtration
- Beverage industry
- Solid catalyst recovery
- Filtration of slurry oil
- Filtration of petrochemical products
- High temperature gas filtration
- Vent applications
- Chemical reagents
- Fluidization
- Highly viscous fluids
